Articles Internationaux (référencés dans Web Of Knowledge):
2021
| S.Meng, J.Shen, L. Taddei, N.Lebaal, D. Veysset, K. A.Nelson,S. Roth, Modelling of micro-particles perforations into human tissue surrogate: numerical and analytical aspects,Extreme Mechanics Letters 45 (2021) 1012 |
| C. Blondé-Weinmann, T.Joubaud, V. Zimpfea, P.Hamery, S. Roth, Characterization of cartilage implication in protected hearing perception during direct vibro-acoustic stimulation at various locations, Applied Acoustics 2021, Applied Acoustics 179(5):108074 |
| A.Bracq, R.Delille, C.Maréchal, B.Bourel, F.Lauro, S.Roth, O.Mauzac, On the use of a SEBS polymer gel block as a new ballistic target to assess blunt ballistic impacts: application to a wide range of LLKE projectiles, International Journal of Impact Engineering Volume 153, July 2021, 103874 |
| 1. Shen J.. Roth S. Effect of geometrical and mechanical parameters of ribs submitted to high velocity impact. A numerical investigation, Mechanics of Advanced Materials and Structures [in press] |
| M. Al Khalil, N. Lebaal, F. Demoly and S. Roth, A design and optimization framework of variable-density lattice structures for additive manufacturing, structures for additive manufacturing |
| S. Meng, M. Al-Khalil, L. Taddei, S. Roth, SPH-based simulation of micro-impacts in human-tissue surrogate: a preliminary study on multilayered structure, Mechanics of Advanced Materials and Structures, [in press] |
| M. Chaufer, R. Delille, B. Bourel, C. Marechal, F. Lauro, O. Mauzac, O. Le Roux, S. Roth, Enhancement of a human thoracic FE model for blunt impact and related trauma, Computer methods in Biomechanics and Biomedical Engineering [in press] |
| C. Blondé-Weinmann, P. Hamery, V. Zimpfer , T. Joubaud, S. Roth, Effects of impedance mismatches on impulse wave’s propagation at the outer ear: a preliminary numerical investigation. Computer methods in Biomechanics and Biomedical Engineering [in press] |
| Ghinwa Ouaidat, Abel Cherouat, Raed Kouta, Dominique Chamoret, Sensitivity analysis of the uncertainties of the mechanical design parameters: Stochastic study performed via a numerical design of experiment, International Journal of Hydrogen Energy, Volume 46, Issue 27, 2021, Pages 14659-14673. |
| C. Charbonné, M.-L. Dhuitte, K. Bouziane, D. Chamoret, D. Candusso, Y. Meyer, Design of experiments on the effects of linear and hyperelastic constitutive models and geometric parameters on polymer electrolyte fuel cell mechanical and electrical behaviour, International Journal of Hydrogen Energy, Volume 46, Issue 26, 2021, Pages 13775-13790. |
| Wang, Zhiping, Yicha Zhang, and Alain Bernard. « A constructive solid geometry-based generative design method for additive manufacturing. » Additive Manufacturing 41 (2021): 101952. |
| Zhang, Y., Tan, S., Ding, L., & Bernard, A. (2021). A toolpath-based layer construction method for designing & printing porous structure. CIRP Annals. (https://doi.org/10.1016/j.cirp.2021.04.020) |
| Wu, H., Liu, S., Xie, X., Zhang, Y., Liao, H., & Deng, S. (2021). A framework for a knowledge based cold spray repairing system. Journal of Intelligent Manufacturing, 1-9. (https://doi.org/10.1007/s10845-021-01770-7) |
| Wu, H., Liu, S., Zhang, Y., Liao, H., Raoelison, R. N., & Deng, S. (2021). New Process Implementation to Enhance Cold Spray-Based Additive Manufacturing. Journal of Thermal Spray Technology, 1-10. (https://doi.org/10.1007/s11666-021-01205-y) |
| Li Weixin, Zheng Chen, Zhang Yicha, (2021) PEEK-Barium Sulfate Composite for 3D Virtual Reconstruction of Printed Human in Vitro Model via CT, Rapid Prototyping Journal (accepted) |
| Ding, Liping, Tan Shujie, Chen, Wenliang, Jin, Yaming, Yicha Zhang (2021) Manufacturability Analysis of Extremely Fine Porous Structures for Selective Laser Melting Process of Ti6Al4V Alloy, Rapid Prototyping Journal (accepted) |
| R. Cai, F. Holweck, Z.-Q. Feng, F. Peyraut « Integrity basis of polyconvex invariants for modeling hyperelastic orthotropic materials—Application to the mechanical response of passive ventricular myocardium », International Journal of Non-Linear Mechanics, 133, 103713, 2021. |
| R. Cai, F. Holweck, Z.-Q. Feng, F. Peyraut “A new hyperelastic strain energy function and integrity basis of invariants for modelling transversely isotropic materials”, International Journal of Solids and Structures, 229, 111133, 2021.. |
| Y. Boutahar,N. Lebaal and D. Bassir, A Refined Theory for Bending Vibratory Analysis of Thick Functionally Graded Beams, Mathematics 2021, 9(12), 1422; https://doi.org/10.3390/math9121422 |
| M Boukraa, M Aissani, N Lebaal, D Bassir, A Mataoui, NT Ighil, H Yue, Effects of Boundary Conditions and Operating Parameters on Temperature Distribution during the Friction Stir Welding Process, IOP Conference Series: Materials Science and Engineering 1140 (1), 012050 |
| Cadiou, T., Demoly, F., & Gomes S. A hybrid additive manufacturing platform based on fused filament fabrication and direct ink writing techniques for multi-material 3D printing, International Journal of Advanced Manufacturing Technology, 2021, 114 , 3551-3562. |
| Khan, M.T.H., Demoly, F., & Kim, K.-Y. Interval algebra and region connection calculus for ontological spatiotemporal assembly product motion knowledge representation. Journal of Integrated Design and Process Science, 2021, In Press. |
| Demoly, F., André, J.-C. Is order creation through disorder in additive manufacturing possible ? Cogent Engineering, 2021, 8(1), 1889110 |
| Dimassi, S., Demoly, F., Cruz, C., Qi, H.J., Kim, K.-Y., André, J.-C., Gomes, S. An ontology-based framework to formalize and represent 4D printing knowledge in design. Computers in Industry, 2021, 126, 103374. |
| Khan, M.T.H., Demoly, F., & Kim, K.-Y. Constructing assembly design model capable of capturing and sharing semantic dynamic motion information in heterogeneous CAD systems. International Journal of Advanced Manufacturing Technology, 2020, 11, 945-961. |
| Roucoules, L., & Demoly, F. Multi-scale and multi-representation CAD models reconciliation for knowledge synthesis. CIRP Annals, 2020, 69(1), 137-140. |
| Jian, B., Demoly, F., Zhang, Y., & Gomes, S. Origami-based design for 4D printing of 3D support-free hollow structures. Engineering, 2021, in Press. |
| Demoly, F., & André, J.-C. Research strategy in 4D printing : Disruptive vs. incremental ? Journal of Integrated Design and Process Science, 2021, in Press. |
| Annovazzi, A., Dembinski, L., Blanchet, E.,Walrand, G., Fenineche, N., Influence of residual pressure on the melting of a powder bed induced by a laser beam on November 16, 2021. |
| Fleischmann, B., Château-Cornu, JP., Dembinski, L., Gys, O., Bigot, R., Danlos, Y., Ghanbaja, J., Influence of particle size on surface oxide of 316L stainless steel powders for Hot Isostatic Pressing, Acta materiala, In press. |
2020
| Shen J. Taddei, L. Roth S. Numerical modelling of a human tissue surrogate SEBS gel under high velocity impacts: investigation of the effect of the strain rate in an elasto-hydrodynamic law, Mechanics of Advanced Material and Structures, [in press] |
| S. Roth, Three-dimensional numerical study of the influence of the thorax positioning submitted to blast loading: Consequences on body trauma, Mechanics of Advanced Materials and Structures, Mechanics of Advanced Materials and Structures 27 (5), 396-402 (2020) |
| Y. Zhao, Y. Wang, F. Peyraut, M.-P. Planche, J. Ilavsky, H. Liao, G. Montavon, A. Lasalle, A. Allimant “Parametric Analysis and Modeling for the Porosity Prediction in Suspension Plasma-Sprayed Coatings”, Journal of Thermal Spray Technology, 29, pp. 51–59, 2020. |
| Y. Zhao, J. Wen, F. Peyraut, M.-P. Planche, S. Misra, B. Lenoir, J. Ilavsky, H. Liao, G. Montavon “Porous architecture and thermal properties of thermal barrier coatings deposited by suspension plasma spray”, Surface & Coatings Technology, 386, 125462, 2020. |
| Zhang Y.*, Wang Z., Zhang Y. Gomes S. & Bernard A., Bio-inspired Generative Design for Support Structure Generation & Optimization in AM, CIRP Annals 69 (1), (accepted, 03/2020) |
| Lu X., Jhon S., Zhang Y*, Liao H. et al., Characterization of Optical Fibers Directly Embedded on Metal using a Particle Spray based Method, IEEE Sensors Journal, 2020 (DOI: 10.1109/JSEN.2020.2977251). |
| Shi Y., Zhang Y., Xia K., *Harik R., A Critical Review of Feature Recognition Techniques, Computer-Aided Design and Applications 17 (05), 861-899, 2020. |
| Yang Shi, Yicha Zhang, Ramy Harik, Manufacturing Feature Recognition via a 2D CNN, CIRP Journal of Manufacturing Science and Technology (CIRP-JMST), (accepted, 02/2020) |
| Vaneker T*., Bernard A., Moroni G., Gibson I. & Zhang Y., A DfAM Framework for Metal Additive Manufacturing Processes, CIRP Annals 69 (2), (accepted, 05/2020) |
| Zhen C*., Wang Z., Qin X., Eynard B., Hehenberger P. Zhang Y., Integrated design for product-service-systems: a focus on multi-displinary interface, International Journal of Production Research (05/2020, accepted) |
| D. Chamoret, N. Lebaal, A. Roman, D. Schlegel & C. Langlade (2020) Thermal aspects in friction stir process of AISI 316L: Numerical and experimental investigation, Mechanics of Advanced Materials and Structures, 27:1, 74-79, DOI: 10.1080/15376494.2018.1472349 |
| Meng S. , Frissane H., Taddei L., Lebaal N., Roth S., The study on performances of kernel types in solid dynamic problems by Smoothed Particle Hydrodynamics, Journal of Computational Particle Mechanics, [in press] |
| Meng S., Taddei L., Lebaal N., Veysset D., Roth S., Modelling micro-particles impacts into ballistic gelatine using smoothed particles hydrodynamics method, Extreme Mechanics Letters 39 (2020) 100852 |
| Lebaal N., Settar A.; Roth, S. Gomes, S., Conjugate heat transfer analysis within in lattice-filled heat exchanger for additive manufacturing, Mechanics of Advanced Material and Structures, [in press], 2020 |
| Meng S., Taddei L., Lebaal N., Veysset D., Roth S, Advances in ballistic penetrating impact simulations on thin structures using Smooth Particles Hydrodynamics: a state of the art, Thin-Walled Structures, 2020 |
| Ghinwa Ouaidat, Abel Cherouat, Raed Kouta, Dominique Chamoret, Numerical modeling of the mechanical behavior of proton exchange membrane fuel cell performance: Design of experiment study and optimization, International Journal of Hydrogen Energy,Volume 45, Issue 46, 2020. |
| Y. SHI, Y. ZHOU, T. BOUDOUH, O. GRUNDER, “A lexicographic-based two-stage algorithm for vehicle routing problem with simultaneous pickup–delivery and time window,” Engineering Applications of Artificial Intelligence, Vol 95, 2020 |
| Liu, M., Zhang, Y., Dong, W., Yu, Z., Liu, S., Gomes, S., … & Deng, S. (2020). Grey modeling for thermal spray processing parameter analysis. Grey Systems: Theory and Application. |
| Zhou, Xiangman; Tian, Qihua; Du, Yixian; Zhang, Yancheng; Xingwang Bai, Xingwang; Zhang, Yicha; Zhang, Haiou; Zhang, Congyag; Yuan, Youlu, ‘The effect of torch tilt and external magnetic field on arc during overlapping deposition of wire arc additive manufacturing’, Rapid prototyping Journal (accepted, 07/2020) |
| R. Djebali, A. Jaouabi, T. Naffouti, S. Abboudi. Accurate LBM appraising of pin-fins heat dissipation performance and entropy generation in enclosures as application to power electronic cooling. International Journal of Numerical Methods for Heat & Fluid Flow. Volume 30, pp 742-768; doi:10.1108/hff-01-2019-0006 |
| A. Bourouis, A. Omara, S. Abboudi. Natural Convection from a Thermal Source Surrounded by a Porous Layer. Heat Transfer Engineering. December 2019, DOI: 10.1080/01457632.2019.1703081. |
| H. Benzenine, R. Saim, S. Abboudi, H. F. Öztop, N. Abu-Hamdeh. Three-dimensional analysis of heat transfer in a channel provided with solid baffle, single and double perforation: A heat exchanger application. Int. Jour. of Numerical Methods for Heat & Fluid Flow. 2019, 0961-5539. DOI 10.1108/HFF-10-2019-0769 |
| H. Qanza, A. Maslouhi, S. Abboudi, M. Hachimi, A. Hmimou Unsaturated Soil Hydraulic Properties Identification using Numerical Inversion and In-Situ Experiments from Mnasra Area, Morocco. October 2019, KSCE Journal of Civil Engineering 23(11):1-11 |
| A Settar, Z Mansouri, R Nebbali, B Madani, S Abboudi. Impact of Ni-based catalyst patterning on hydrogen production from MSR: External steam reformer modelling. International Journal of Hydrogen Energy. April 2019, 44 (22), 11346-11354 |
| M. Benramdane, S. Abboudi, M.E.A Ghernaout. Contribution to the simulation and parametric analysis of the operation of a solar concentration thermal installation. International Journal of Heat and Technology, June 2019, Vol. 37, No. 2, pp. 446-456. https://doi.org/10.18280/ijht.370210 |
| B. Rostane, K. Aliane, S. Abboudi. Influence of Insertion of Holes In the Middle of Obstacles On the Flow Around a Surface-Mounted Cube. Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Volume 9, Issue 1 – Serial Number 17, 2019, Pages 77-87 |
| H. Benzenine, S. Abboudi, R. Saim. Effect of the presence of a shoulder on the thermal and dynamic structure of a laminar flow in an airplane solar collector. Numerical Heat Transfer, Part B: Fundamentals , An International Journal of Computation and Methodology, Volume 77, 2020 – Issue 3 |
| Wu, H., Xie, X., Liu, M., Verdy, C., Zhang, Y., Liao, H., & Deng, S. (2020). Stable layer-building strategy to enhance cold-spray-based additive manufacturing. Additive Manufacturing, 35, 101356. |
| Wu, H., Xie, X., Liu, M., Chen, C., Liao, H., Zhang, Y., & Deng, S. (2020). A new approach to simulate coating thickness in cold spray. Surface and Coatings Technology, 382, 125151. |
2019
| A Settar, Z Mansouri, R Nebbali, B Madani, S Abboudi. Impact of Ni-based catalyst patterning on hydrogen production from MSR: External steam reformer modelling. International Journal of Hydrogen Energy. 1-9, October 2018 |
| Y. Zhao, F. Peyraut, M.P. Planche, J. Ilavsky, H. Liao, A. Lasalle, A. Allimant, G. Montavon « Experiments, Statistical Analysis, and Modeling to Evaluate the Porosity Influence in SPS Coatings », Journal of Thermal Spray Technology, 28, pp. 76–86, 2019 |
| A. Bracq, R.Delille, C. Marechal, B. Bourel, S. Roth, O. Mauzac, Rib fractures prediction method for kinetic energy projectile impact: from blunt ballistic experiments on SEBS gel to impact modeling on a human torso FE model, Forensic science International,Volume 297, April 2019, Pages 177-183, 2019 |
| I. Fourar, A.H. Benmachiche, S Abboudi. Effect of material and geometric parameters on natural convection heat transfer over an eccentric annular-finned tube. International Journal of Ambient Energy, 2019, 1-19 |
| N. Lebaal, Y. Zhang, F. Demoly, S. Roth, S. Gomes, A. Bernard, Optimised lattice structure configuration for additive manufacturing, CIRP Annals, 2019 |
| M. Al-Khalil, H. Frissane, L. Taddei, S. Meng, N. Lebaal, F. Demoly, C. Bir, S. Roth, SPH-based method to simulate penetrating impact mechanics into ballistic gelatine: Toward an understanding of the perforation of human tissue, Extreme Mechanics Letters, (29) 100479, 2019 |
| Zheng, C., Qin, X., Eynard, B., Li, J., Bai, J., Zhang, Y., & Gomes, S. (2019). Interface model-based configuration design of mechatronic systems for industrial manufacturing applications. Robotics and Computer-Integrated Manufacturing, 59, 373-384. |
| Zhang, Y., Li, W., Zhang, C., Liao, H., Zhang, Y., & Deng, S. (2019). A spherical surface coating thickness model for a robotized thermal spray system. Robotics and Computer-Integrated Manufacturing, 59, 297-304. |
| Zheng, C., Eynard, B., Qin, X., Li, J., Bai, J., Gomes, S., & Zhang, Y. (2019). A requirement-driven architecture definition approach for conceptual design of mechatronic systems. Integrated Computer-Aided Engineering, (Preprint), 1-22. |
| Zhang, Y., Harik, R., Fadel, G., & Bernard, A. (2019). A statistical method for build orientation determination in additive manufacturing. Rapid Prototyping Journal, 25(1), 187-207. |
| N. Lebaal, Robust low cost meta-modeling optimization algorithm based on meta-heuristic and knowledge databases approach: Application to polymer extrusion die design, Finite Elements in Analysis and Design, Volume 162, (2019), Pages 51-66 |
| Hamel C.M., Roach D.J., Long K.N., Demoly F., Dunn M.L. and Qi H.J., Machine-learning based design of active composites for 4D printing. Smart Materials and Structures, 2019, 28(6), 065005. |
| Sossou G., Demoly F., Belkebir H., H. Qi J., Montavon G. and Gomes S. Design for 4D printing : A voxel-based modeling and simulation of smart materials. Materials & Design, 175, 2019, 107798. |
| Frissane H, Taddei, L. Lebaal, N. Roth S., 3D smooth particle hydrodynamics modeling for high velocity penetrating impact using GPU: Application to a blunt projectile penetrating thin steel plates, Computer Methods in Applied Mechanics and Engineering [in press], 2019 |
| Y. Zhao, Y. Wang, F. Peyraut, H. Liao, G. Montavon, M.-P. Planche, J. Ilavsky, A. Lasalle, A. Allimant “Evaluation of nano/submicro pores in suspension plasma sprayed YSZ coatings”, Surface & Coatings Technology, 378, 125001, 2019. |
| Wu, H., Xie, X., Liu, M., Chen, C., Liao, H., Zhang, Y., & Deng, S. (2019). A new approach to simulate coating thickness in cold spray. Surface and Coatings Technology, 125151. |
| Changhai Lin, Yi Wang, Sifeng Liu*, Yicha Zhang, On Spectrum Analysis of Different Weakening Buffer Operators ,The Journal of Grey System 31 (4), 2019. |
| Zheng, C., Qin, X., Eynard, B., Bai, J., Li, J., & Zhang, Y. (2019). SME-oriented flexible design approach for robotic manufacturing systems. Journal of Manufacturing Systems, 53, 62-74. |
| Liu, M., Yu, Z., Zhang, Y., Wu, H., Liao, H., & Deng, S. (2019). Prediction and analysis of high velocity oxy fuel (HVOF) sprayed coating using artificial neural network. Surface and Coatings Technology, 124988. |
| Sossou G., Demoly F., Belkebir H., Qi H.J., Gomes S., Montavon G., Design for 4D printing: Modeling and computation of smart materials distributions. Materials & Design, 2019, 181, 108074. |
| Demoly F., Kim K.-Y., Horvath I., Ontological engineering for supporting semantic reasoning in design: Deriving models based on ontologies for supporting engineering design. Journal of Engineering Design, 30(10-12), pp. 405-416. |
| Meyer, Y., Lachat, R., Akhras, G., A review of manufacturing techniques of smart composite structures with embedded bulk piezoelectric transducers, Smart Materials and Structures 28(5),053001, 2019 |
| Tuloup, C., Harizi, W., Aboura, Z., (…), Khellil, K., Lachat, R., On the use of in-situ piezoelectric sensors for the manufacturing and structural health monitoring of polymer-matrix composites: A literature review, Composite Structures, 215, pp. 127-149, 2019. |
| Tuloup, C., Harizi, W., Aboura, Z., (…), Khellil, K., Lachat, R., On the manufacturing, integration, and wiring techniques of in situ piezoelectric devices for the manufacturing and structural health monitoring of polymer–matrix composites: A literature review, Journal of Intelligent Material Systems and Structures, 30(16), pp. 2351-2381, 2019 |
| Y. SHI, T. BOUDOUH, O. GRUNDER, “A robust optimization for a home health care routing and scheduling problem with consideration of uncertain travel and service times,” Transportation Research Part E: Logistics and Transportation, Vol 128, 2019, pp 52-95. |
| N. Di Cesare, M. Domaszewski, A new hybrid topology optimization method based on I-PR-ESO and ESO. Application to continuum structural mechanics, Computers & Structures, vol. 212, February 2019, pp 311-326. |
| Bracq, C. Maréchal, R. Delille, B. Bourel, F. Lauro, S. Roth, O. Mauzac, A numerical analysis of the risk of rib fractures during blunt ballistic impacts on a human thorax, Computer Methods in Biomechanics and Biomedical Engineering, 22:sup1, S1-S393, DOI: 10.1080/10255842.2019.1668135, 2019 |
2018
| Sossou G., Demoly F., Montavon G. and Gomes S., An additive manufacturing oriented design approach to mechanical assemblies, Journal of Computational Design and Engineering, 2018, 5(1), pp. 3-18 |
| A. Settar, S. Abboudi S, R. Nebbali, B. Madani. Estimation of transient heat flux density during the heat supply of a catalytic wall steam methane reformer. Heat and Mass Transfer, 2018, vol. 54, no 2, p. 385-391. |
| A. Hamadouche, A. Azzi, S. Abboudi, R. Nebbali. Enhancement of heat exchanger thermal hydraulic performance using Aluminum foam. Experimental Thermal and Fluid Science, Volume 92, April 2018, Pages 1-12, Oct 2017. |
| P Lesage, L Dembinski, M Schmitt, JP Roth, S Gomes, S Roth, (2018) Low-velocity impact loadings on mechanical components: Subtractive versus additive manufacturing, Mechanics Research Communications 90, 47-51 |
| Frissane H. ,Taddei L . , Lebaal N. , Roth S . , SPH modeling of high velocity impact into ballistic gelatin. Development of an axis-symmetrical formulation, Mechanics of Advanced Materials and Structures, April 2018 |
| Bracq A ,Haugou G , Bourel B, Maréchal C , Lauro F , Roth S , Mauzac O , On the modeling of a visco-hyperelastic polymer gel under blunt ballistic impacts, International Journal of Impact Engineering, International Journal of Impact Engineering 118 (2018) 78–90 |
| D. Chamoret, N. Lebaal, A. Roman, D. Schlegel, C. Langlade, Thermal aspects in friction stir process of AISI 316L: Numerical and experimental investigation, Mech. Adv. Mater. Struct. (2018) 1–6. doi:10.1080/15376494.2018.1472349. |
| M.-S. Chebbah, N. Lebaal, Tube hydroforming optimization using a surrogate modeling approach and Genetic Algorithm, Mech. Adv. Mater. Struct. (2018) 1–10. doi:10.1080/15376494.2018.1482578. |
| A. Settar, S. Abboudi, N. Lebaal, Effect of inert metal foam matrices on hydrogen production intensification of methane steam reforming process in wall-coated reformer, Int. J. Hydrog. Energy. (n.d.). doi:10.1016/j.ijhydene.2018.04.215. |
| Lévay P, Holweck F. A fermionic code related to the exceptional group E 8. Journal of Physics A: Mathematical and Theoretical. 2018 May 1. |
| Y. Zhao, Y. Wang, Z. Yu, M.-P. Planche, F. Peyraut, H. Liao, A. Lasalle, A. Allimant, G. Montavon “Microstructural, mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating”, Journal of the European Ceramic Society, Vol. 38, Issue 13, pp. 4512-4522, 2018. |
| Moustafa Boukraa, Nadhir Lebaal, Amina Mataoui, Abdelhakim Settar, Mouloud Aissani, Nacer Tala-Ighil, « Friction stir welding process improvement through coupling an optimization procedure and three-dimensional transient heat transfer numerical analysis”, Journal of Manufacturing Processes 34 (2018) 566–578. |
| Yicha Zhang, Alain Bernard, Ramy Harik, Georges Fadel, (2018) « A new method for single-layer-part nesting in additive manufacturing », Rapid Prototyping Journal, https://doi.org/10.1108/RPJ-01-2017-0008; |
| Zhang, Yicha, and A. Bernard. « A KBE CAPP framework for qualified additive manufacturing. » Cirp Annals (2018). |
| MANSOURI Z., SETTAR A., KHAMANE H. Computational investigation of heat load and secondary flows near tip region in a transonic turbine rotor with moving shroud. Applied Thermal Engineering, 2018, vol. 136, p. 141-151. |
| S El Oualid, R Lachat, D Candusso, Y Meyer, Characterization process to measure the electrical contact resistance of Gas Diffusion Layers under mechanical static compressive loads, International Journal of Hydrogen Energy 42 (37), 23920-23931, 2018 |
| R. Zemra, T. Boudouh, M. Baheddi, “Causes of schedule delays in construction projects in Algeria,” International Journal of Construction Management, 2018. |
| Y. Shi, T. Boudouh, O. Grunder, D. Wang, “Modeling and solving simultaneous delivery and pick-up problem with stochastic travel and service times in home health care,” Expert Systems With Applications, Vol 102, 2018, pp 218-233. |
| A. Settar, N. Lebaal, S. Abboudi, Numerical analysis of catalytic-coated walls of an indirect internal reforming solid oxide fuel cell: influence of catalyst coating distribution on the reformer efficiency, Energy Conversion and Management, Vol. 176, (2018) |
| A. Settar, S. Abboudi, R. Nebbali, B. Madani. Estimation of transient heat flux density during the heat supply of a catalytic wall steam methane reformer. Heat and Mass Transfer, 2018, vol. 54, no 2, p. 385-391. |
| H. Benzenine, R. Saim, S. Abboudi, O. Imine. Comparative Study Of The Thermo-Convective Behavior A Turbulent Flow In A Rectangular Duct In The Presence Of Three Planar Baffles And / Or Corrugated (Waved). Journal of Engineering Science and Technology, vol. 13, No. 1. (2018) 35-45. |
| A, Omara, S, Abboudi. Numerical Thermal Non-Equilibrium Approach Of Natural Convection In A Square Porous Cavity With Non-Uniform Heating. Computational Thermal Sciences, January 2018 11(1-2), DOI: 10.1615/ComputThermalScien. 2018024737 |
| Wang R., Shen M., Li Y. and Gomes S. Multi-task Joint Sparse Representation Classification Based on Fisher Discrimination Dictionary Learning, Computers, Materials & Continua, vol.57 no.1, pp.25-48, 2018. |
| Aghahadi, E. Padayodi, S. Abboudi, S.A. Bahrani. Physical modeling of heat and moisture transfer in wet bio-sourced insulating materials. Review of Scientific Instruments 2018, 89 (10), 104902 |
| Shi, Y., Zhang, Y., Baek, S., De Backer, W., & Harik, R. (2018). Manufacturability analysis for additive manufacturing using a novel feature recognition technique. Computer-Aided Design and Applications, 15(6), 941-952. |
| Y. Saad, R. Younes, S. Abboudi, A. Ilinca. Hydro-pneumatic storage for wind-diesel electricity generation in remote sites. Applied Energy 231 (2018) 1159–1178 |
| Y. Shi, T. Boudouh, O. Grunder, “An Efficient Tabu Search based Procedure for Simultaneous Delivery and Pick-up Problem with Time Window,” IFAC-PapersOnLine, Volume 51, Issue 11, 2018, Pages 241-246. |
2017
| L. Merouani, S. Abboudi, et S. Boulahrouz, « Analysis of conjugated processes of film evaporation and condensation in a tubular heat exchanger », The Canadian Journal of Chemical Engineering, Vol 95, pp 559-567, March 2017. |
| M. Bodo, S. Roth, Numerical investigation of similarity laws for blast simulation: open-field propagation and interaction with a biomechanical model, Mechanics of Advanced Materials and Structures [in press] |
| A Bracq, G Haugou, R Delille, F Lauro, S Roth, O Mauzac, Experimental study of the strain rate dependence of a synthetic gel for ballistic blunt trauma assessment, Journal of the Mechanical Behavior of Biomedical Materials 72, 138-147 (2017) |
| F Demoly, S Roth, Knowledge-based parametric CAD models of configurable biomechanical structures using geometric skeletons, Computers in Industry 92, 104-117 (2017) |
| L. Taddei, N. Lebaal, S. Roth, Axis-symmetrical Riemann problem solved with standard SPH method. Development of a polar formulation with artificial viscosity. Computers and Mathematics with Applications, 2017 |
| M. Bodo, A Bracq, R Delille, C. Marechal, S. Roth, Thorax injury criteria assessment through non-lethal impact using an enhanced biomechanical model, Journal of Mechanics in Medicine and Biology 17 (07), 1740027 |
| MTH Khan, F Demoly, KY Kim, Formal ontology and CAD integration with macro parametric approachFormal ontology and CAD integration with macro parametric approach, Computer-Aided Design and Applications, 1-9, 2017 |
| E Gruhier, F Demoly, S Gomes, A spatiotemporal information management framework for product design and assembly process planning reconciliation, Computers in Industry 90, 17-41, 2017 |
| R Cai, F Holweck, ZQ Feng, F Peyraut, A simple polyconvex strain energy density with new invariants for modeling four-fiber family biomaterials, International Journal of Solids and Structures 115, 126-139, 2017 |
| M Saniga, F Holweck, P Pracna, Veldkamp spaces: From (Dynkin) diagrams to (Pauli) groups, International Journal of Geometric Methods in Modern Physics 14 (05), 1750080, 2017 |
| Péter Lévay, Frédéric Holweck, Metod Saniga,The magic three-qubit Veldkamp line: A finite geometric underpinning for form theories of gravity and black hole entropy, Phys. Rev. D 96, 026018 (2017) |
| F Holweck, J-G Luque, J-Y Thibon, Entanglement of four-qubit systems: A geometric atlas with polynomial compass II (the tame world), Journal of Mathematical Physics 58, no. 2 (2017): 022201. |
| F Holweck, M Saniga, Contextuality with a small number of observables, International Journal of Quantum Information 15, no. 04 (2017): 1750026. |
| Bracq A, Maréchal C, Delille R., Bourel B., Roth S. , Mauzac O. (2017), Methodology for ballistic blunt trauma assessment, Computer Methods in Biomechanics and Biomedical Engineering, 20:sup1, 31-32, DOI: 10.1080/10255842.2017.1382846 |
| Bodo M., Roth S. (2017) Lung tissue modelling under non-penetrating impact: a comparative investigation on numerical injury criteria, Computer Methods in Biomechanics and Biomedical Engineering, 20:sup1, 21-22, DOI: 10.1080/10255842.2017.1382841 |
| Taddei L., Frissane H., Lebaal N., Roth S. (2017) Smoothed particle hydrodynamics – based method for penetrating impacts in a biomechanical context, Computer Methods in Biomechanics and Biomedical Engineering, 20:sup1, 199-200, DOI: 10.1080/10255842.2017.1382931 |
| Lebaal N., Azaouzi M., Roth S. (2017) Shape optimization of coronary stents based on Finite Element Analysis, Computer Methods in Biomechanics and Biomedical Engineering, 20:sup1, 119-120, DOI: 10.1080/10255842.2017.1382888 |
| Shi Y, Boudouh T, Grunder O (2017), A hybrid genetic algorithm for a home health care routing problem with time window and fuzzy demand, Expert Systems With Applications, Vol 72, 2017, pp 160-176. |
| AIN Korti, S Abboudi. Effects of Shot Sleeve Filling on Evolution of the Free Surface and Solidification in the High-Pressure Die Casting Machine. International Journal of Metalcasting 11 (2), 223-239, 2017. |
| M. Moderres, S. Abboudi, M. Ihdene, S. Aberkane, A. Ghezal, Numerical investigation of double-diffusive mixed convection in horizontal annulus partially filled with a porous medium. International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 27 No. 4, 2017, pp. 773-794. |
| S. Khaldi, A.N. Korti, S. Abboudi. Applying CFD for Studying the Dynamic and Thermal Behavior of Solar Chimney Drying System with Reversed Absorber. International Journal of Food Engineering. 2017; 20170081 |
| A. Settar, R. Nebbali, B. Madani, S. Abboudi. Numerical study on the effects of the macropatterned active surfaces on the wall-coated steam methane reformer performances. International Journal of Hydrogen Energy 40 (29), 8966-8979, 2017. |
| B, Marconnet, F Demoly, D, Monticolo S, Gomes, An assembly oriented design and optimization approach for mechatronic system engineering, , Int. J. Simul. Multisci. Des. Optim., 8 (2017) A7 |
| S. Nouri, A. Ghezal, S. Abboudi. Numerical Study of Laminar Natural Flow Transitions in Rectangular Cavity. Applied Mathematics and Mechanics, Sept. 2017. |
| Y. SHI, T. BOUDOUH, O. GRUNDER, “A Home Health Care Routing Problem with Stochastic Travel and Service Time,” IFAC-PapersOnLine, Volume 50, Issue 1, July 2017, Pages 13987-13992. |
2016
| Z. Hammoudan, O. Grunder, T. Boudouh, et A. El Moudni, « A coordinated scheduling of delivery and inventory in a multi-location hospital supplied with a central pharmacy », Logistics Research, vol. 9, no 1, déc. 2016. |
| R. Cai, F. Holweck, Z.-Q. Feng, et F. Peyraut, « A new hyperelastic model for anisotropic hyperelastic materials with one fiber family », Int. J. Solids Struct., vol. 84, p. 1‑16, mai 2016. |
| A. Aliane, S. Abboudi, C. Seladji, et B. Guendouz, « An illustrated review on solar absorption cooling experimental studies », Renewable and Sustainable Energy Reviews, vol. 65, p. 443‑458, nov. 2016. |
| E. Gruhier, F. Demoly, K.-Y. Kim, S. Abboudi, et S. Gomes, « A theoretical framework for product relationships description over space and time in integrated design », J. Eng. Des., vol. 27, no 4‑6, p. 269‑305, juin 2016. |
| F. Holweck et P. Levay, « Classification of multipartite systems featuring only vertical bar W > and vertical bar GHZ > genuine entangled states », J. Phys. A-Math. Theor., vol. 49, no 8, p. 085201, févr. 2016. |
| A. Belferrag, A. Kriker, S. Abboudi, et S. Tié Bi, « Effect of granulometric correction of dune sand and pneumatic waste metal fibers on shrinkage of concrete in arid climates », Journal of Cleaner Production, vol. 112, Part 4, p. 3048‑3056, janv. 2016. |
| A. A. Goumtcha, M. Bodo, L. Taddei, et S. Roth, « From military to civil loadings: Preliminary numerical-based thorax injury criteria investigations », Int. J. Numer. Meth. Biomed., vol. 32, no 3, p. e02738, mars 2016. |
| A. N. Nkenfack, T. Beda, Z.-Q. Feng, et F. Peyraut, « HIA: A Hybrid Integral Approach to model incompressible isotropic hyperelastic materials-Part 1: Theory », Int. J. Non-Linear Mech., vol. 84, p. 1‑11, sept. 2016. |
| A. Nguessong-Nkenfack, T. Beda, Z.-Q. Feng, et F. Peyraut, « HIA: A Hybrid Integral Approach to model incompressible isotropic hyperelastic materials – Part 2: Finite element analysis », International Journal of Non-Linear Mechanics, vol. 86, p. 146‑157, nov. 2016. |
| T. Tchoumi, F. Peyraut, et R. Bolot, « Influence of the welding speed on the distortion of thin stainless steel plates-Numerical and experimental investigations in the framework of the food industry machines », J. Mater. Process. Technol., vol. 229, p. 216‑229, mars 2016. |
| A. Omara, A. Bourouis, et S. Abboudi, « Numerical Approach of Thermal non Equilibrium Natural Convection in a Square Porous Cavity with Partially Thermally Active Side Walls », J. Appl. Fluid Mech., vol. 9, p. 223‑233, 2016. |
| P. Mauborgne, S. Deniaud, E. Levrat, E. Bonjour, J.-P. Micaelli, et D. Loise, « Operational and System Hazard Analysis in a Safe Systems Requirement Engineering Process – Application to automotive industry », Saf. Sci., vol. 87, p. 256‑268, août 2016. |
| N. Di Cesare, D. Chamoret, et M. Domaszewski, « Optimum topological design of negative permeability dielectric metamaterial using a new binary particle swarm algorithm », Advances in Engineering Software, 101, 149-159. |
| M. Gruber, N. Lebaal, S. Roth, N. Harb, P. Sterionow, et F. Peyraut, « Parameter identification of hardening laws for bulk metal forming using experimental and numerical approach », International Journal of Material Forming, vol. 9, no 1, p. 21‑33, janv. 2016. |
| A. I. N. Korti, M. C. Korti, et S. Abboudi, « Thermal Effect in Minimizing Air Entrainment in the 3D Shot Sleeve During Injection Stage of the HPDC Machine », International Journal of Fluid Mechanics Research, vol. 43, no 1, p. 1‑17, 2016. |
| Y. Faydi, R. Lachat, et Y. Meyer, « Thermomechanical characterisation of commercial Gas Diffusion Layers of a Proton Exchange Membrane Fuel Cell for high compressive pre-loads under dynamic excitation », Fuel, vol. 182, p. 124‑130, oct. 2016. |
| A. Bourouis, A. Omara, et S. Abboudi, « Upward and downward conjugate mixed convection heat transfer in a partially porous cavity », Int. J. Numer. Methods Heat Fluid Flow, vol. 26, no 1, p. 159‑188, 2016. |
| D. Aussavy, R, Bolot, G, Montavon, F, Peyraut, G, Szyndelman, J, Gurt-Santanach, S, Selezneff., « YSZ-Polyester Abradable Coatings Manufactured by APS », J. Therm. Spray Technol., vol. 25, no 1‑2, p. 252‑263, janv. 2016. |
| D Chamoret, M Bodo, S Roth, A first step in finite-element simulation of a grasping task, Computer Assisted Surgery Vol. 21 , Iss. sup1,2016. |
| M Bodo, S. Roth, Uncertainties of impacts configuration for numerical replications of real-world trauma : a FE analysis, J. Mech. Med. Biol. 16, 1640018 (2016) DOI: http://dx.doi.org/10.1142/S0219519416400182 |
| F Holweck, H Jaffali, Three-qutrit entanglement and simple singularities, Journal of Physics A: Mathematical and Theoretical 49, no. 46 (2016): 465301. |
| F Holweck, H Jaffali, and I Nounouh, Grover’s algorithm and the secant varieties, Quantum Information Processing 15, no. 11 (2016): 4391-4413. |
| A. Almusawi, R. Lachat, K.E. Atcholi, S. Gomes » Proposal of manufacturing and characterization test of binderless hemp shive composite » International Biodeterioration & Biodegradation, DOI: 10.1016/j.ibiod.2016.09.011, 115, 302-307 (2016) |
| H. Qanza, A. Maslouhi, S. Abboudi. Experience of inverse modeling for estimating hydraulic parameters of unsaturated soils. Russian Meteorology and Hydrology 41(11-12):779-788, Nov. 2016. |